Stepless Height Adjustments

3010 | 3011 | 3025 Bevel gear with spindle and support tube

Gear for stepless height adjustment mainly for manual sit/sit workstations

• transmission ratio 1:1, 1.33:1
• housing made of reinforced glass-fibre
• load capacity 1200 N
• output spindle for push force only
• available in various lengths and with various mounting brackets
• up to 4 input wheels possible
• can be driven from above

3010_bevel_gear.pdf - 568 kB

3014 Bevel gear with spindle and support tube

Gear for stepless height adjustment mainly for manual sit/sit workstations

• transmission ratio 1:1, 1.33:1
• housing made of Aluminium
• load capacity1200 N
• output spindle for push force only
• available in various lengths and with various mounting brackets
• availabe with different input angles

3014_bevel_gear.pdf - 1 MB

3014 / 3022 / 3025 Bevel gear (deflection gear unit)

Deflection gear unit predominantly for manual sit/sit workstations

• transmission ratio 1:1
• housing made of reinforced glass-fibre
• case-hardened steel gear cogs
• max. torgue 3 Nm

3014_22_25_deflection_gear_unit.pdf - 313 kB

3034 Bevel gear

Gear for stepless height adjustment for sit/sit- or sit/stand work stations. The gear is adapted for both manual and motorized height adjustment.

• Very slim size, square 25,8
• Ratio 1 : 1
• Housing made of reinforced glass-fibre
• Case hardened toothed wheels of steel, reinforced teeth
• Output bevel-wheel running in ball bearings
• Especially suitable for the driving with Ketterer motors

3034_bevel_gear.pdf - 524 kB

3035 / 3036 Bevel gear with spindle and support tube

Gear for stepless height adjustment for sit/sit and sit/stand workstations

• housing made of zinc die-casting
• ball bearing on the output side
• output can be loaded on pull or on pressure

3035_bevel_gear.pdf - 743 kB

3039 Bevel gear with spindle and support tube

Gear for stepless height adjustment for sit/sit or sit/stand work stations

• low-priced
• small assembly dimensions
• high speed for adjustment
• in combination with our motor drive KTS 3143 the ideal solution for your height adjustment

3039_bevel_gear.pdf - 501 kB

3042 / 3043 Bevel gear with spindle and support tube

Gear for stepless height adjustment for sit/sit and sit/stand workstations

• suitable for manual and for motorized height adjustment
• transmission ratio 1:1
• housing made of zinc die-casting
• hardened, bearing seated steel gear cogs
• particularly suitable for motorized solutions
• up to 2 inputs possible

3042_bevel_gear.pdf - 577 kB

3045 Bevel gear

Gear for stepless height adjustment for sit/sit- or sit/stand work stations. The gear is adapted for both manual and motorized height adjustment. Deflection gear unit, predominantly adapted for manual sit/sit work stations.

• Ratio 1 : 1 or 1 : 2
• Housing made of reinforced glass-fibre
• Case hardened toothed wheels of steel, reinforced tooth system
• Particularly suitable for the driving with motor system KTS 3143

3045_bevel_gear.pdf - 296 kB

3051 Gas spring synchronisation unit

Synchronisation unit for gas spring tables with an integrated brake. The unit is suitable for efficiently synchronising a two-footed table. The brake acts on both legs. The travel of 500 mm meets the requirements of the new standards for sitting/standing tables. The safety actuator prevents the user from actuating the table unintentionally.

The system is modular in design, and the table is therefore easy to assemble on-site for the end customer. The connecting rod between the table legs and the manual actuator is only fitted during final assembly. This means that the table can be sent in the normal way to any part of the world with the minimum package dimensions.

3051_gas_spring_unit.pdf - 1 MB

3056 Bevel gear with spindle and support tube

Gear for stepless height adjustment for sit/sit and sit/stand workstations

• suitable for manual and for motorized height adjustment
• transmission ratio 1:2
• transmission ratio doubles the speed
• housing made of zinc die-casting
• with bearing seated output spindle

3056_bevel_gear.pdf - 1 MB

3070 / 3071 Bevel gear with spindle and support tube

Gear for stepless height adjustment for sit/sit and sit/stand workstations

• suitable for manual and for motorized height adjustment
• transmission ratio 1.83:1
• housing made of zinc die-casting
• hardened, bearing seated steel gear cogs
• particularly suitable for motorized solutions
• up to 4 inputs possible

3070_bevel_gear.pdf - 1 MB

3120 Electric inline drive

Electric motor solution for the individual sit-stand work station. Stepless height adjustement with customer specific stroke.

• drive for the assembly in the table base
• simple mounting
• integrated position measuring system
• single telescopic function

3120_inline_drive.pdf - 465 kB

3122 Electric inline drive

Motorized solution for the individual sit-stand workplace. Stepless height adjustment to customer specific stroke.

A slender design allows to integrate the complete inline actuator into the tubes of a table leg. Simple mounting, integrated position measuring system, single telescopic function.

3122_inline_drive.pdf - 836 kB

3130.14 Single stroke telescopic spindle unit

Motorized solution for the individual sit-stand workplace. Smooth running, stepless height adjustment to customer specific stroke.

• High movement speed
• Single telescopic function
• With max. stroke
• Simple mounting
• Suitable for the driving with Ketterer motor 3133

3130.14_spindle_unit.pdf - 715 kB

3131 Motor drive

Electric motor solution for the individual sit-stand work station. Stepless height adjustement with customer specific stroke.

• simple mounting
• integrated position measuring system
• single telescopic function
• completely damped against vibration and noise by an elastic coupling as well as by several absorbers

3131_motor_drive.pdf - 639 kB

3824 Bevel gear with spindle and support tube

Gear for stepless height adjustment of school furniture, office furniture and workstations

• suitable for the mounting in tubes with an inside diameter of 31mm
• transmission ratio 1:1
• housing made of reinforced glass-fibre
• case-hardened gear wheels
• spindle nut made of reinforced glass-fibre

3824_bevel_gear.pdf - 436 kB

3826 Bevel gear with spindle and support tube

Gear for stepless height adjustment of school furniture, office furniture and workstations

• suitable for the mounting in tubes with an inside diameter of 25mm
• transmission ratio 1:1
• housing made of zinc die-casting
• case hardened steel cog wheelsr

3826_bevel_gear.pdf - 589 kB

3900 / 3901 / 3902 / 3903 / 3904 Bevel gear with spindle

Gear for machine construction, lifting systems for attic windows, winter gardens and greenhouses

• transmission ratio 1.44:1
• housing made of zinc die-casting
• NWF-special gearing ensures a smooth running of the gear
• particularly suitable for operation with e-motors from the company Dunker

3900_bevel_gear.pdf - 1 MB

4114 Electric synchronous telescopic drive

Electric motor solution for the individual sit/stand workstation

• smooth running stepless height adjustment
• simple mounting
• integrated position measuring system
• twice telescopable
• synchronious motion of the spindle elements
• electronic synchronisation
• double stroke speed

4114_telescopic_drive.pdf - 697 kB

4114_telescopic_drive_info_sheet.pdf - 619 kB

4115.14 Double stroke synchronized telescopic spindle

Individual solution for a motorized sit-stand workplace. Smooth-running, stepless adjustment for max. stroke. Protection by the utility model is registered

• Twice telescopable with max. stroke
• Synchronous movement of the spindle components
• Double movement speed
• Simple mounting
• Suitable for the driving with Ketterer motor KTTB 3133

4115_synchronized_telescopic_spindle.pdf - 689 kB

4139 Fast crank adjustment

Cost-efficient solution for the individual sit/stand workstation

• smooth running stepless height adjustment with high crank speed
• small and compact design
• simple mounting
• synchronious motion of the spindle elements
• double stroke speed
• stroke per crank rotation 14 mm

4139_fast_crank_adjustment.pdf - 625 kB

4141 Monitor lifting system

Motorized solution for the individual monitor adjustment. Simple ergonomic positioning by stepless height adjustment. Perfect supplement to ergonomic work stations.

4141_monitor_lifting_system.pdf - 672 kB

4142 Electric linear actuator

Cost-efficient solution for individual applications.

• compact design, high quality surfaces
• smooth running stepless linear actuator
• integrated position measuring system
• end switches by software-end plies
• silent running

4142_linear_actuator.pdf - 436 kB

4601 Carpenter adjustment

Stepless height adjustement for sit workstations with crank.

The kits accord to EU Directives for onscreen work stations, as well as to the latest medical findings.

Application areas of the kits:

• Office / workshop desks
• CAD and EDP desks
• Packing boards / kitchen blocks
• Work stations for disabled person

4601_carpenter_adjustment.pdf - 177 kB

4630 Electric telescopic spindle drive

Motorized solution for individual sit/stand workplaces

• smooth stepless height adjustment
• simple mounting
• integrated position measuring system
• dual telescopic function
• as a result of the drive’s modular structure, special customer requirements can be me

4630_telescopic_drive.pdf - 539 kB

4640 Electric spindle drive

Motorized solution for sit/stand workplaces – stepless height adjustment to customer specific travel distance

• simple mounting
• integrated position measuring system
• single telescopic function
• as a result of the drive’s modular structure, special customer requirements can be met

4640_spindle_drive.pdf - 387 kB

4642 Electric spindle drive

Motorized solution for sit/stand workplace. Stepless height adjustment to customer specific travel distance.

• simple mounting
• integrated distance of travel output
• single telescopic function
• synchronization with multiple actuators
• as a result of the drive’s modular structure, special customer requirements can be met

4642_electric_spindle_drive.pdf - 443 kB

4701 Ket-Flex Wide Lift

This lift unit is extremely narrow and versatile, can be used with any width, and will raise a load of up to 80 kg.

Its extremely narrow dimensions mean that this lift is suitable for very narrow screens. The two units are mechanically independent from one another, and therefore any width can be achieved. It has attachment points on either side that can be used to mount it. The telescopic unit gives you the best possible ratio of stroke to installation dimension. We offer a choice of two strokes, up to 537 mm or up to 750 mm.

ket_flex_wide_lift_en.pdf - 1 MB

4701 Ket Spring Lift Small

Compact lifting system for flat screens. Lifted by a gas spring without motor drive.

The damped gas spring ensures a very smooth stop of the unit.

• very small unit, suitable for tight spaces

Customer specific lengths and lifting forces can be realized with a minimum order quantity of 100 pieces.

4701_ket_spring_lift_s_en.pdf - 411 kB

4701 Ket Screen Lift Small

Cost-efficient, compact lifting system. For screens up to 24” and weights up to 25 kg.

System with high lifting speed. Control box with integrated overheating protection for the screens. Simple installation. Very low noise level allows applications in noise sensitive areas.

4701_ket_screen_lift_s_en.pdf - 1 MB

4701 Ket Screen Lift Large

Cost-efficient, compact lifting system. For screens up to 50” and weights up to 70 kg.

System with high lifting speed. Control box with integrated overheating protection for the screens. Simple installation. Very low noise level allows applications in noise sensitive areas.

4701_ket_screen_lift_l_en.pdf - 3 MB

4702 / 4703 Lifting system

Lifting module for engineering, work stations, flexible sit/stand work stations, height adjustable divan beds.

• laterally, the slide is guided by steel shafts, each with two hardened rollers
• housing made of aluminium profiles
• in short-term operation high transporting speeds can be achieved

4702_lifting_module.pdf - 619 kB

4802 / 4803 / 4813 Bevel gear

Gear for stepless height adjustment for sit/sit or sit/stand workstations

• transmission ratio 2:1
• housing made of die-cast zinc
• case-hardened steel gear cogs
• output bearing can be loaded on pressure
• NWF gear-teeth ensures smooth running

4802_bevel_gear.pdf - 739 kB

4850 Bevel gear

Angled gear for height adjustable furniture and mechanical engineering

• stepless adjustable
• housing made of zinc die-casting
• case-hardened gear wheels

4850_bevel_gear.pdf - 650 kB

Hand control and motor cables

The range of accessories for control consists of various manual switches and cables different motor cables suitable for the respective Ketterer drive solutions. Custom and application-specific activation and control of your continuous adjustment.

The manual switches are characterized by a clean design and ease of use. You can motor drive with all Ketterer be used.

hand_control_motor_cables.pdf - 456 kB

Controls

A wide variety of accessories are available for our motorized program consisting of:

• various control boxes
• manual switches
• appropriate cables

Your supplement to the Ketterer lifting and gear systems.

controls.pdf - 363 kB