Application area "Table"

Manual solutions



Gas Spring Synchronisation Unit 3051
Fast crank lifting system 3052
Fast crank adjustment 4139
Bevel gear 3010
Bevel gear 3014
Bevel gear 3070
Bevel gear 3824
Bevel gear 3826
Bevel gear 3039
Bevel gear 3045
Deflection gear unit 3014
Deflection gear 3039
Deflection gear 3045
Crank handle 5108
Crank handle 5186
Crank handle 5190

Bevel gear with spindle and support tube 3010 | 3011 | 3025

Bevel gear with spindle and support tube 3010 | 3011

Gear for stepless height adjustment mainly for manual sit/sit workstations

  • transmission ratio 1.3:1
  • housing made of reinforced glass-fibre
  • load capacity 1200 N
  • output spindle for push force only
  • available in various lengths and with various mounting brackets
  • up to 4 input wheels possible
  • can be driven from above

Bevel gear with spindle and support tube 3014

Bevel gear with spindle and support tube 3014

Gear for stepless height adjustment mainly for manual sit/sit workstations

  • transmission ratio 1:1, 1.3:1
  • housing made of reinforced glass-fibre
  • load capacity1200 N
  • output spindle for push force only
  • available in various lengths and with various mounting brackets
  • availabe with different input angles

Deflection gear 3014

Deflection gear 3014

Gear for deflecting for a rotary motion at an angle of 90°, 120° oder 135°

  • transmission ratio 1.3:1
  • housing made of reinforced glass-fibre or aluminium at an angle of 90°/120°/135°
  • case-hardened steel bevel wheels

Bevel gear 3039

Bevel gear 3039

Gear for stepless height adjustment for sit/sit- or sit/stand work stations. The gear is adapted for both manual and motorized height adjustment.

  • Ratio 1:1
  • Housing made of reinforced glass-fibre
  • Case hardened toothed wheels of steel, reinforced tooth system
  • Ball bearing output wheels
  • Particularly suitable for the driving with Ketterer motors

Deflection gear 3039

Deflection gear 3039

Gear for the deflection of the rotation by 90° degree.

  • Ratio 1:1
  • Synthetic gear housing
  • Case-hardened steel bevel wheels

Bevel gear 3045

Bevel gear 3045

Gear for stepless height adjustment for sit/sit- or sit/stand work stations. The gear is adapted for both manual and motorized height adjustment. Deflection gear unit.

  • Ratio 1:1 or 1:2
  • Housing made of reinforced glass-fibre
  • Case hardened toothed wheels of steel, reinforced tooth system
  • Particularly suitable for the driving with motor system KTS 3143

Deflection gear 3045

Deflection gear 3045

Gear for the deflection of the rotation by 90° degree.

  • Ratio 1:1 or 2:1
  • Synthetic gear housing
  • Case-hardened steel bevel wheels

Gas spring spindle actuator 3051

Gas spring spindle actuator 3051

Gas spring supported spindle lift drive for stepless height adjustment for two-leg sitting/standing tables.
The manual lift drive with mechanical blocking unit is actuated by a manual release with Bowden cables. The travel of 500 mm meets the requirements of the new standards for sitting/standing tables. The safety actuator prevents the user from actuating the table unintentionally.

The system is modular in design, and the table is therefore easy to assemble on-site for the end customer. The connecting rod between the table legs and the manual actuator is only fitted during final assembly. This means that the table can be sent in the normal way to any part of the world with the minimum package dimensions.


Fast crank lifting system 3052

Fast crank lifting system 3052

Crank lifting system for fast height adjustment of sitstand workplaces. Mechanical synchronization of two spindle lift drives with crank, brake unit, deflection gear and drive shafts. The system is suitable for 2-leg table frames with high efficiency of the guide units. Convenient adjustment of up to 40 kg table loads is ensured. The lift of 500 mm meets the requirements of the new standard for sitting-standing workplaces.


Bevel gear with spindle and support tube 3070 / 3071

Bevel gear with spindle and support tube 3070 / 3071

Gear for stepless height adjustment for sit/sit and sit/stand workstations

  • suitable for manual and for motorized height adjustment
  • transmission ratio 1.83:1
  • housing made of zinc die-casting
  • hardened, bearing seated steel gear cogs
  • particularly suitable for motorized solutions
  • up to 4 inputs possible

Bevel gear with spindle and support tube 3824

Bevel gear with spindle and support tube 3824

Gear for stepless height adjustment of school furniture, office furniture and workstations

  • suitable for the mounting in tubes with an inside diameter of 31mm
  • transmission ratio 1:1
  • housing made of reinforced glass-fibre
  • case-hardened gear wheels
  • spindle nut made of reinforced glass-fibre

Bevel gear with spindle and support tube 3826

Bevel gear with spindle and support tube 3826

Gear for stepless height adjustment of school furniture, office furniture and workstations

  • suitable for the mounting in tubes with an inside diameter of 25mm
  • transmission ratio 1:1
  • housing made of zinc die-casting
  • case hardened steel cog wheelsr

Fast crank adjustment 4139

Fast crank adjustment 4139

Cost-efficient solution for the individual sit/stand workstation

  • smooth running stepless height adjustment with high crank speed
  • small and compact design
  • simple mounting
  • synchronious motion of the spindle elements
  • double stroke speed
  • stroke per crank rotation 14 mm

Crank handle 5108 / 5159

Crank handle 5108 / 5159

Wire-flexured cranks in several measurements

  • crank grips made of synthetic material
  • materials > steel (galvanized) und and stainless steel
  • customer specific solutions can be produced rapidly at a competitive price because of the use of a production method which does not depend on specific tools or design

Crank handle 5186

Crank handle with crank holder and clamping rings 5186

The crank is to fold by 90°

  • crank-handle grip and crank extension are made of glass-fibre reinforced synthetic material
  • allows a fine adjustment
  • ergonomic shape and modern design

Crank handle 5190

Crank handle 5190

Crank handle

  • grip and crank extension made of glass-fibre reinforced synthetic material
  • allows fine adjustment
  • modern design