Next event

automatica
Munich, Germany

16.06.2020 – 19.06.2020
Hall X | Booth X

Workshop & Laboratory Manual Solutions

Bevel gear with spindle unit 3014 — Bevel gear with spindle unit 3014

Lifting force 1200 N
Type of spindle Tr 14x3
Ratio 1,3:1

Deflection gear unit 3014 — Deflection gear unit 3014

Rotary motion 90°, 120°, 135°
Ratio 1,3:1
Drive torque 3 Nm

Bevel gear with spindle unit 3039 — Bevel gear with spindle unit 3039

Max. Lifting force 800-1200 N
Type of spindle SG14x16, Tr14x3
Ratio 1:1

Bevel gear with spindle unit 3045 — Bevel gear with spindle unit 3045

Max. Lifting force 1200 N
SG14x16P4, Tr14x3
Ratio 1:1, 1:2

Deflection gear 3039 — Deflection gear 3039

Rotary motion 90°
Ratio 1:1
Max. drive torque 4 Nm

Deflection gear 3045 — Deflection gear 3045

Rotary motion 90°
Ratio 1:1, 2:1
Max. drive torque 6 Nm

Bevel gear with spindle unit 3070 | 3071 — Bevel gear with spindle unit 3070 | 3071

Max. Lifting force 1200 N
Drive torque 6 Nm
Type of spindle SG12x12P4

Bevel gear with spindle unit 3824 — Bevel gear with spindle unit 3824

Max. Lifting force 1000 N
Drive torque 3 Nm
Type of spindle Tr14x3

Monitor-/TV-Lift </br>Ket Spring Lift S 4701 — Monitor-/TV-Lift
Ket Spring Lift S 4701

Powerless, Lifted by a gas spring
Max. load bis 80 N
Max. stroke 479 mm

Crank handle 5108 | 5159 — Crank handle 5108 | 5159

Crank grips synthetic material
Steel (galvanized), stainless steel
Many variants

Crank handle 5186 — Crank handle 5186

Can be folded by 90°
Glass-fibre reinforced synthetic material
Dynamic torque 2 Nm

Crank handle 5190 — Crank handle 5190

Glass-fibre reinforced synthetic material
Hex 6 mm
Crank extension 65 mm

Ketterer drives power products all over the world. We are one of the market leaders in the mechanical and motorized drive technology sector.

Bahnhofstr. 20, 78120 Furtwangen

+49 7723 9323-0

info_at_ketterer.de