KuLi - electrical short stroke actuator

Description

Compact and fast electrically operated linear drive. The drive is particularly suitable for use in automation and conveying technology. The parameterization takes place via a connect box (sold separately). The control electronics are integrated.

  • Compact design
    We achieve a stroke of 40 mm with a housing length of just 67 mm
  • Powerful and dynamic
    Thrust/tensile forces up to 300 N, speed up to 445 mm/s
  • Easy parameterization
    User friendly software and connect-box
  • Integrated control
    Configuration and teach-in of the system without expert knowledge
  • Maintenance-free

Variant key

The Kuli short-stroke linear drive is available in different variants. The variants are composed in accordance with the ordering code shown on the data sheet.


Model KuLi
Stroke length / Max. travel path 40 mm
Spindle pitch 6 mm (Standard) or 1 mm
Max. thrust-/tensile forces 300 N
Max. speed load-free 445 mm/s
Max. holding force (static) 500 N
Supply voltage 24 V DC + 10 %/ -25%
Max. current consumption (Peak) up to 10 A
Power consumption 240 W
Resolution of the encoder system +/- 0.15 mm
Repeatability1) +/- 0.2 mm
IP protection class IP 24 (with anti-twist device)
Ambient temperature +5 bis +42° C
Life time (10 N load)2) 20 Mio. Cycles3)

1) With increasing load and number of cycles, the repeat accuracy will change due to wear and tear
2) The service life can vary depending on operation and installation conditions and is load-dependent (see chart)
3) One cycle= extend-pause-retract-pause

  • Shock resistance in the static state according to IEC EN 60068-2-27: 50 g 11 ms
  • VVibration resistance in the static state according to IEC EN 60068-2-6: 10 - 2000 Hz 5g 10 frequency cycles
  • Weight: 0.9 kg (variant with anti-twist device)
  • Material: Aluminium & Zinc die-casting

Technical notes with standard-software variants DM/SM/PM


Dynamic Mode Standard Mode Power Mode
Max. thrust/tensile forces 100 N200 N300 N
Mean speed at 40 mm 267 mm/s160 mm/s114 mm/s
Max. travel time for 40 mm 150 ms250 ms350 ms
Max. perm. cycle rate (Cycle/Min.)1)462912
EDuty cycle
VMoving time per cycle*
Holding time per cycle*
23 %
0.3 s
1 s
24 %
0.5 s
1.6 s
13 %
0.7 s
4.5 s

1) One cycle= extend-pause-retract-pause

Attention!

  • This technical data only applies for KuLi with 6 mm spindle pitch (KuLi-B6-XX-X-EX-X-X)
  • For the technical specifications for KuLi with 1 mm pitch (KuLi-B1-XX-X-EX-X-X), please consult the manufacturer
  • Data determined at room temperature
  • Exposure to radial forces is not allowed

Parameterization with software mode Expert (Ex)

Expert Mode (6 mm) Expert Mode (1 mm)
Thrust/tensile force 0 - 300 N 0 - 500 N
ø Speed at 40 mm (mm/s) 445 - 114 mm/s 75 - 15 mm/s
Travel time for 40 mm (s) 0.09 - 0.35 s 0.54 - 2.67 s
Perm. number of cycles (Cycles/Min.)* 103 - 12 40 - 6

* One cycle= extend-pause-retract-pause

https://www.ketterer-drives.com/products/detailansicht/kuli-electrical-short-stroke-actuator