Manual Spindle Drives

Bevel gear 3010
Bevel gear 3014
Bevel gear  3034
Bevel gear 3039
Bevel gear 3045
Bevel gear 3824
Bevel gear 3826
Bevel gear 3042
Bevel gear 3070
Bevel gear 3900
Gas Spring Synchronisation Unit 3051
Fast crank lifting system 3052
Bevel gear  3035
Fast crank adjustment 4139
Bevel gear 3056
Bevel gear 3057
Bevel gear 3058

Bevel gear with spindle and support tube 3010 | 3011 | 3025

Bevel gear with spindle and support tube 3010 | 3011

Gear for stepless height adjustment mainly for manual sit/sit workstations

  • transmission ratio 1.3:1
  • housing made of reinforced glass-fibre
  • load capacity 1200 N
  • output spindle for push force only
  • available in various lengths and with various mounting brackets
  • up to 4 input wheels possible
  • can be driven from above

Bevel gear with spindle and support tube 3014

Bevel gear with spindle and support tube 3014

Gear for stepless height adjustment mainly for manual sit/sit workstations

  • transmission ratio 1:1, 1.3:1
  • housing made of reinforced glass-fibre
  • load capacity1200 N
  • output spindle for push force only
  • available in various lengths and with various mounting brackets
  • availabe with different input angles

Bevel gear 3034

Bevel gear 3034

Gear for stepless height adjustment for sit-sit- or sit-stand tables. The gear is adapted for both manual and motorized height adjustment.

  • Very slim size, square 25,8
  • Ratio 1 : 1
  • Housing made of reinforced glass-fibre
  • Case hardened toothed wheels of steel, reinforced teeth
  • Output bevel-wheel running in ball bearings
  • Especially suitable for the driving with Ketterer motors

Bevel gear with spindle and support tube 3035 / 3036

Bevel gear with spindle and support tube 3035 / 3036

Gear for stepless height adjustment for sit/sit and sit/stand workstations

  • housing made of zinc die-casting
  • ball bearing on the output side
  • output can be loaded on pull or on pressure

Bevel gear 3039

Bevel gear 3039

Gear for stepless height adjustment for sit/sit- or sit/stand work stations. The gear is adapted for both manual and motorized height adjustment.

  • Ratio 1:1
  • Housing made of reinforced glass-fibre
  • Case hardened toothed wheels of steel, reinforced tooth system
  • Ball bearing output wheels
  • Particularly suitable for the driving with Ketterer motors

Bevel gear with spindle and support tube 3042 / 3043

Bevel gear with spindle and support tube 3042 / 3043

Gear for stepless height adjustment for sit/sit and sit/stand workstations

  • suitable for manual and for motorized height adjustment
  • transmission ratio 1:1
  • housing made of zinc die-casting
  • hardened, bearing seated steel gear cogs
  • particularly suitable for motorized solutions
  • up to 2 inputs possible

Bevel gear 3045

Bevel gear 3045

Gear for stepless height adjustment for sit/sit- or sit/stand work stations. The gear is adapted for both manual and motorized height adjustment. Deflection gear unit.

  • Ratio 1:1 or 1:2
  • Housing made of reinforced glass-fibre
  • Case hardened toothed wheels of steel, reinforced tooth system
  • Particularly suitable for the driving with motor system KTS 3143

Gas spring spindle actuator 3051

Gas spring spindle actuator 3051

Gas spring supported spindle lift drive for stepless height adjustment for two-leg sitting/standing tables.
The manual lift drive with mechanical blocking unit is actuated by a manual release with Bowden cables. The travel of 500 mm meets the requirements of the new standards for sitting/standing tables. The safety actuator prevents the user from actuating the table unintentionally.

The system is modular in design, and the table is therefore easy to assemble on-site for the end customer. The connecting rod between the table legs and the manual actuator is only fitted during final assembly. This means that the table can be sent in the normal way to any part of the world with the minimum package dimensions.


Fast crank lifting system 3052

Fast crank lifting system 3052

Crank lifting system for fast height adjustment of sitstand workplaces. Mechanical synchronization of two spindle lift drives with crank, brake unit, deflection gear and drive shafts. The system is suitable for 2-leg table frames with high efficiency of the guide units. Convenient adjustment of up to 40 kg table loads is ensured. The lift of 500 mm meets the requirements of the new standard for sitting-standing workplaces.


Bevel gearbox 3056

Bevel gearbox 3056

Compact gear for big umbrellas, engineering, dividing wall systems. A special toothing ensures a smooth running of the gear.

  • ratio 1 : 2
  • housing made of die-cast zinc
  • case-hardened cog wheels

Bevel gear 3057

Bevel gear 3057

Gear for stepless height adjustment of school furniture, office furniture and workstations. A special toothing ensures a smooth running of the gear.

  • Ratio 1 : 2
  • Housing made of die-cast zinc
  • Case-hardened bevel wheels
  • Simple mounting

Bevel gear 3058

Bevel gear 3058

Compact gear for big umbrellas, industry applications. A special toothing ensures a smooth running of the gear.

  • Ratio1:4
  • Housing made of aluminium
  • Case-hardened bevel wheels

Bevel gear with spindle and support tube 3070 / 3071

Bevel gear with spindle and support tube 3070 / 3071

Gear for stepless height adjustment for sit/sit and sit/stand workstations

  • suitable for manual and for motorized height adjustment
  • transmission ratio 1.83:1
  • housing made of zinc die-casting
  • hardened, bearing seated steel gear cogs
  • particularly suitable for motorized solutions
  • up to 4 inputs possible

Bevel gear with spindle and support tube 3824

Bevel gear with spindle and support tube 3824

Gear for stepless height adjustment of school furniture, office furniture and workstations

  • suitable for the mounting in tubes with an inside diameter of 31mm
  • transmission ratio 1:1
  • housing made of reinforced glass-fibre
  • case-hardened gear wheels
  • spindle nut made of reinforced glass-fibre

Bevel gear with spindle and support tube 3826

Bevel gear with spindle and support tube 3826

Gear for stepless height adjustment of school furniture, office furniture and workstations

  • suitable for the mounting in tubes with an inside diameter of 25mm
  • transmission ratio 1:1
  • housing made of zinc die-casting
  • case hardened steel cog wheelsr

Bevel gear with spindle 3900 / 3901 / 3902 / 3903 / 3904

Bevel gear with spindle 3900 / 3901 / 3902 / 3903 / 3904

Gear for machine construction, lifting systems for attic windows, winter gardens and greenhouses

  • transmission ratio 1.44:1
  • housing made of zinc die-casting
  • NWF-special gearing ensures a smooth running of the gear
  • particularly suitable for operation with e-motors from the company Dunker

Fast crank adjustment 4139

Fast crank adjustment 4139

Cost-efficient solution for the individual sit/stand workstation

  • smooth running stepless height adjustment with high crank speed
  • small and compact design
  • simple mounting
  • synchronious motion of the spindle elements
  • double stroke speed
  • stroke per crank rotation 14 mm