Product Innovations

Electric linear drive with spindle 4778
Bevel gear 3058
Angled gear 200X
Worm gear 2010
Motor drive 3133
Motor drive KTS 3143
Synchronized telescopic spindle 4115
Spindle unit 3130.14
Bevel gear  3034
Fast crank lifting system 3052
Ket-Flex Wide Lift 4701
Lifting unit for cupboard systems 4644

Electric linear drive with spindle 4778

Electric linear drive with spindle 4778

Direct current motor with worm gear and throughgoing not rotating spindle for push and pull movements. Depending on push or pull force the correct assembly situation should be noted.

  • Motor drive with integrated position measuring system

Bevel gear 3058

Bevel gear 3058

Compact gear for big umbrellas, industry applications. A special toothing ensures a smooth running of the gear.

  • Ratio1:4
  • Housing made of aluminium
  • Case-hardened bevel wheels

Angular gear Ket-Bee 200X

Angular gear Ket-Bee 200X

Angular gear for manifold applications

  • 7 sizes, side lenght from 32 mm to 60 mm
  • Ratio 1:1
  • Aluminium housing, anodized
  • Steel bevel wheels, case-hardened
  • Maintenance-free

Worm gear 2010

Worm gear 2010

  • Worm gear for universal applications
  • Center distance 20 mm
  • Compact design
  • Outer dimensions 60×60×35 mm
  • 7 ratios of 13:1 to 65:1
  • Aluminium housing, anodized
  • Maintenance-free

Motor drive 3133.00

Motor drive 3133.00

Motor drive with through-going hexagon socket. 24V-DC motor with worm gear.

  • high braking torque
  • integrated position measuring system
  • applicable with all Ketterer
    spindle systems
  • very powerfull

Motor drive KTS 3143

Motor drive KTS 3143

Hollow shaft (hex) gear motor. DC motor with worm gear.

  • actuator with integrated distance of travel output
  • simple upgrade from manual to motorized system
  • motor inclusive motorcable, length 1 m.

Double stroke synchronized telescopic spindle 4115.14

Double stroke synchronized telescopic spindle 4115.14

Individual solution for a motorized sit-stand tables. Smooth-running, stepless adjustment for max. stroke. Protection by the utility model is registered

  • Twice telescopable with max. stroke
  • Synchronous movement of the spindle components
  • Double movement speed
  • Simple mounting
  • Suitable for the driving with Ketterer motor KTTB 3133

Single stroke telescopic spindle unit 3130.14

Single stroke telescopic spindle unit 3130.14

Motorized solution for the individual sit-stand tables. Smooth running, stepless height adjustment to customer specific stroke.

  • High movement speed
  • Single telescopic function
  • With max. stroke
  • Simple mounting
  • Suitable for the driving with Ketterer motor 3133

Bevel gear 3034

Bevel gear 3034

Gear for stepless height adjustment for sit-sit- or sit-stand tables. The gear is adapted for both manual and motorized height adjustment.

  • Very slim size, square 25,8
  • Ratio 1 : 1
  • Housing made of reinforced glass-fibre
  • Case hardened toothed wheels of steel, reinforced teeth
  • Output bevel-wheel running in ball bearings
  • Especially suitable for the driving with Ketterer motors

Fast crank lifting system 3052

Fast crank lifting system 3052

Crank lifting system for fast height adjustment of sitstand workplaces. Mechanical synchronization of two spindle lift drives with crank, brake unit, deflection gear and drive shafts. The system is suitable for 2-leg table frames with high efficiency of the guide units. Convenient adjustment of up to 40 kg table loads is ensured. The lift of 500 mm meets the requirements of the new standard for sitting-standing workplaces.


Ket-Flex Wide Lift 4701

Ket-Flex Wide Lift 4701

This lift unit is extremely narrow and versatile, can be used with any width, and will raise a load of up to 80 kg.

Its extremely narrow dimensions mean that this lift is suitable for very narrow screens. The two units are mechanically independent from one another, and therefore any width can be achieved. It has attachment points on either side that can be used to mount it. The telescopic unit gives you the best possible ratio of stroke to installation dimension. We offer a choice of two strokes, up to 537 mm or up to 750 mm.


Lifting unit for cupboard systems 4644

Lifting unit for cupboard systems 4644

Lifting unit for stepless height adjustment of cupboard systems particularly suitable for cabinets and wall units.

  • at cabinet depth of max. 600 mm: load (static) max. 275 kg
  • at cabinet depth of max. 600 mm: load (dynamic) max. 275 kg
  • lifting speed: 26 mm per second
  • stroke: 310 mm
  • simple assembly